• Valves
• Safety Relief Valves
• Ferrule Crimping Tools
• Brass Hose Ferrules

Part Selector:  

    --SELECT--  » BENCH FERRULE CRIMPING TOOL  » BRASS DUAL HOSE BRACES, OVAL  » BRASS HOSE CLAMPS  » HAND-HELD FERRULE CRIMP TOOLS  » HEAVY-DUTY FERRULE CRIMP MACHINE

BRASS DUAL HOSE BRACES, OVAL

PART NO.	INSIDE DIMENSION	LENGTH	METAL THICKNESS
DIMENSIONS IN INCHES
9116	.448 x .890	15/32	0.019
9979	.474 x .943	15/32	0.019
9940-P	.535 x 1.071	3/4	0.024
453	.593 x 1.238	3/4	0.025
453-A	.640 x .1310	3/4	0.025
454	.700 x 1.325	3/4	0.025

BRASS HOSE CLAMPS

PART NO.	FOR HOSE ID	CLAMP ID
DIMENSIONS IN INCHES
500	3/16"	7/16"
501	1/4"	1/2"
502	1/4"	9/16"
503	3/8"	5/8"
504	3/8"	11/16"
505	3/4"	3/4"
506	1/2"	15/16"

HAND-HELD FERRULE CRIMP TOOLS

PART NO.	DESCRIPTION
CRIMP WITH HAMMER STRIKE OR VISE PRESSURE:
C-1	2 Hole Jaw 5/8" Wide, Use on 3/16", 1/4" Hose
C-3	3 Hole Jaw 1" Wide, Use on 3/16", 1/4", 3/8" Hose
C-3B	3 Hole Jaw 1" Wide, Use on 1/4", 4/16", 3/8" Hose

PART NO.	DESCRIPTION
CRIMP WITH HAND-GRIP PRESSURE:
C-5	2 Hole Jaw 1/2" Wide, Use on 3/16", 1/4" Hose
C-5A	3 Hole Jaw 1/2" Wide, Use on 5/16", 1132", 27/64" Hose
C-6	2 Hole Jaw 1/2" Wide, Use on 5/8", 11/16" Hose

BENCH FERRULE CRIMPING TOOL

PART NO.	DESCRIPTION
5111-A	Bench Model Hose Crimper Dies need to be ordered separately Dies are available in standard sets listed in Ferrule Table. Each set includes four segments. Dies are available with plain contracting surface (CD) or special three-ribbed surface (CDR). Sets are ordered by using die numbers in the Ferrule Table. Examples: Plain Die for Ferrule K-K: Order CD-38 Ribbed Die for Ferrule K-K: Order CDR-37

HEAVY-DUTY FERRULE CRIMP MACHINE

PART NO.	DESCRIPTION
CR-100	Heavy-Duty Ferrule Crimp Machine

For more information, call Western Customer Service
at 1-800-783-7890 for technical data sheets