 |
| Hover Over Image to Enlarge |
Ordering Information - Filters for Regulator Inlet Nuts & Nipples
Most brass annd stainless steel nipples may be ordered in any of the following 3 configurations:
1. Brass and Stainless Steel Nipples without a Filter
Simply order the part numbers as listed in the tables below.
2. Brass Nipples Requiring a Filter Recess. (No Filter Installed)
Add a "-S" to the part numbers listed in the tables below.
Brass nipples may be ordered with a filter recess. Filters are placed at the front or rear of the nipple, depending on the nipple design.
| Example: |
.jpg) |
| Part No. 63-S - Brass Nipple with Recess |
3. Brass and Stainless Steel Nipples with Installed Filter
Add a "-SF" to the part numbers listed in the tables below.
| Example: |
 |
| Part No. - 3SF - 100 Mesh Stainless Steel Filter |
| PART NO. | DESCRIPTION |
|---|---|
| S-2 | 100 Mesh Stainless Steel: 140 Microns |
| S-3 | Porous Metal: Nickel Plated Bronze, 45 Microns |
May be used with all stainless steel and brass nipples, except for CGA-320 Nipples
 |
| Hover Over Image to Enlarge |
RETAINER RING FOR SELECTED NIPPLES
| PART NO. | DESCRIPTION |
|---|---|
| MOO-5 | Nipple Retainer Ring, Steel |
For use only in specially grooved nipples. Ring prevents nut from sliding down to the nipple.