| Model |
Problem |
Cause |
Solution / Parts to Replace |
|
| Leaking at the cylinder. |
O-Ring Missing or cracked |
W615-0 O-Ring |
| Helium Leaking out of the Tilt Valve |
Tilt Valve Damaged Due to Excessive Bending |
TV Tilt Valve |
|
|
| Gauge Cracked |
Regulator Was Dropped |
WMG-75 Gauge
CH-4BH-Chain/Hook |
|
|
| Leaking at the cylinder. |
O-Ring Missing or cracked |
W615-0 O-Ring |
| Helium Leaking out of the Tilt Valve |
Tilt Valve Damaged Due to Excessive Bending |
TV Tilt Valve |
|
|
| Gauge Cracked |
Regulator was Dropped |
G-18-4000W Gauge
RPB-5-1T - Tie Hook, BRC Ribbon Cutter |
|
|
| Leaking at the cylinder. |
O-Ring Missing or cracked |
W615-0 O-Ring |
| Helium Leaking out of the Tilt Valve |
Tilt Valve Damaged Due to Excessive Bending |
TV Tilt Valve |
| Gauge Cracked |
Regulator was Dropped |
WMG-75 GAUGE |
|
|
| Leaking at the cylinder. |
O-Ring Missing or cracked |
W615-0 O-Ring |
| Helium Leaking out of the Tilt Valve |
Tilt valve damaged due to excessive bending |
TV, BRC, PV3, TH1 |
| Gauge Cracked |
Regulator was Dropped |
G18-4000W GAUGE |
|
|
| Latex Push Valve Leaks |
Defective Valve |
PV |
| Foil Push Valve Leaks |
Defective Valve |
PV3 |
| Leaking at the Cylinder |
O-Ring Missing or Cracked |
W615-0 |
| Gauge Cracked |
Regulator Dropped |
G-18-4000W |
|
|
| Leaking at the Cylinder |
O-Ring Missing or Cracked |
W615-0 |
| Helium Leaking out of the Tilt Valve |
Tilt Valve Damaged due to Excessive Bending |
TV |
| Foil Push Valve Leaks |
PV3 |
| Gauge Cracked |
Regulator Dropped |
G-18-4000W
BRC/TH1 |
|
|
| Leaking at the cylinder. |
O-Ring Missing or cracked |
W615-0 O-Ring |
| Latex Push Valve Leaks |
Defective Valve |
PV, RPB-5-U Tip
RPB-5-1BT Large Balloon Tip |
| Gauge Cracked |
Regulator was Dropped |
G18-4000W |
|
|
| Leaking at the cylinder. |
O-Ring Missing or cracked |
W615-0 O-Ring |
| Gauge Cracked |
Regulator Dropped |
G-18-4000W Gauge |
| Leaking out of Body |
Diaphragm has blown out |
Contact WestWinds for RGA to be repaired. |
|
|
| Helium Leaking out of the tilt valve |
Tilt valve damaged due to excessive bending |
TV Tilt Valve |
| Foil Push Valve leaks |
|
PV3 Push Valve |
|
|
| Helium Leaking out of the tilt valve |
Tilt valve damaged due to excessive bending |
TV Tilt Valve |
| Foil Push Valve leaks |
|
PV3
B1GHT - Regulator, RBS-012H Hose |
|
|
| Leaking at the nozzle. |
Dropped or cylinder fell over. |
Send back, call customer service. |
|
|
| Tilt Valve leaking, Quick Connect broken, Knob is bad. |
Dropped or Other |
BL-TV, RPB-5-1V, BL30
Can only replace tilt valve and quick connect. Must return if knob is bad. |
|
|
| Bleeder Valve Leaks |
Valve is Stripped |
211 |
| Leaking at the Cylinder |
O-Ring is Missing or Cracked |
W615-0 O-Ring |
| Gauge is not Registering |
|
G-2-4000W GAUGE |
|
